1 Network Connection

Before web operation,you need to connect the equipment with internet.

Step1.Connect the equipment with the internet correctly.

Step2.Set LAN following to the ninth term Network Setup in  reference manuals first part.

Step3.when Lan is connected,it needs to set up port mapping for public network access.

Step4.DDNS Application.You can apply for DDNS in the http://www.3322.org/  and http://www.oray.com/

Step5.DDNS Setup.Make sure to fill the right info in the Main Menu->System->NetService->DDNS

Note:The device must be in the same network with PC,if cannot connect,pls check the device IP if it works fine.

2. Remote Monitoring

After connecting the network, two kinds of methods can be used for remote monitoring which are client software and common browser.Client software(CMS) is professional software used in multi-equipments monitoring, which is safe, convenient and stable. It is the better one that we advise customers use it. And the browser comes with system such as IE browser.

2.1 Client software

CMS software is used in a computer, and manipulates several DVR at the same time.

Step1. Please take CD out of the accessory box, then copy CMS installed software in it.

Step2.After installing this software at the local PC, then open the operation system as in picture 6,Enter the add device interface throughSystem>Device Manager>Add area/device, and enter DVR information which is needed manipulating following the prompts, in that way, you can manipulate any specified equipment. And the method is the same with web manipulation’s.

Step3. You can add several DVR more to do monitor operation if you repeat this operation.

Picture 7 CMS Interface

2.2 WEB

After the network connecting, using the browser comes with computer login DVR to do remote monitoring.

Step1. install the plug. Open the disk, then get activex_v1.1.0.32.exe and install.

Step2. Connect the equipment. Open web browser, then enter IP address on the address bar of the equipment. For example, the IP address of the equipment is, and then you should enter on the address bar to connect.

Pop up as follows interface after connecting successfully.

Note: when  first  login, see  below  picture

Picture 8 Web Login Interface

Step3. Login. Enter user’s name and password, the default Administrator User ID is admin, and the password is admin. The user should change the administrator’s password timely after loginning in.(If choose “Local Area Network”,it’s Main streams,if “wide Area Network”,it’s Sub streams.)

You will see as follows interface after loginning in.

Picture 9 WEB operation interface

3. Basic Web Operation

Do web operation in picture 8 web operation interface

1) Screen Split

Choose image preview mode;

2) Playback

Enter playback mode, which supports multi-channel playing back simultaneously.

3) Log

Display log information;

4) Local Config

Alarm and System setting

5) Channel operation

Open the videos. Left click and choose a window in the left, and choose the corresponding channel in the right, then double click the video. Open the second channel’s video, choose the left window, then select the corresponding channel in the right, after then, double click the video. Opening other channels is the same way. If you have chosen the window of opened video, then open other channels in the right, the system will close all the channels and open new channel. Customers can adjust image mode upon opened video channels.

Close the channel. Rightclick mouse at the channels which are needed to close. Or choose to close all the windows to close opened video channels.